3
Rollerdor RD77 Installation Guide, Edition 2022/01
IMPORTANT SAFETY
INSTRUCTIONS
The RD77 must be installed
and operated in accordance
with the instructions supplied;
failure to do so could result
in damage to your door and
compromise your safety.
These fitting instructions are for guidance only, you should always assess your
building construction for installation as each opening has its own specific needs.
Please read these instructions carefully and in full before commencing the installation
of your RD77 product.
WARNING AND GUIDANCE NOTES
1
At least TWO people are required to install this
product.
2
Prior to installing please remove all rings,
watches and sharp objects to avoid any
possibility of damage.
3
Prior to installing please remove any items of
loose clothing to avoid any risk of entanglement
or injury.
4
Your RD77 comes complete with a 3 pin plug as
standard (this is supplied and must be fitted
with a 13amp fuse) which should be plugged
straight into a 13amp 3 pin switched socket
in the vicinity of your control box. Should you
need any extra electrical work, this must be
carried out by a suitably qualified person.
If you have any doubts please consult an
electrician.
5
Your control system should be installed in
a location that is at a comfortable height
to operate, but out of the easy reach of
children.
6
Please do not allow children to operate
the RD77 as serious injury can occur from
misuse.
7
Warning: you must have a clear line of sight
of the whole of your curtain when it is in
operation. Failure to do so may result in harm
to persons or damage.
