10
RolliBot RolliCool A20 Portable A/C with Heater User Manual
Window Kit Parts
Sections
These sections thread into one another and
should be placed within a window gap.
Installation
Step 3.
Attach the wheels (if needed) and roll
the unit into the desired room. In the moving
process, ensure that the unit is in an upright
position and the RolliCool is placed on a flat
surface.
Screw Head
Washer
Screw Base
B
B
A
B
A
These parts are used to secure the sections
together and can be loosened or tightened
when adjusting the sections according to
window height.
Screw Fastener
Step 1.
Separate one screw fastener and
thread the screw base into one end of Section
B.
Step 2.
Thread Section A onto the end of
Section B and use the screw head and washer
to secure the sections together.
Step 4.
Insert the connector into the piper and
rotate it clockwise to secure it. Slide the other
end of the heat exhaust pipe into the opening
outside the air vent on the back of the unit.
Unfurl the pipe to the necessary length.