______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E
17
/32
ROLLMAN
Adding material for ironing
•
Place the material you want to
iron in the inductor of material
(induction plate), so that it is
perpendicular to the edge of inductor
and with no wrinkles. Then press board
to the end, starting rotation of the roller,
always keeping your hands away from
ironing element (heating plates, so that
the edge of the material for ironing can
be caught by ironing element (heating
plate). Hold the board pressed, until you
pass the whole length of the material for
ironing.
Removing the inductor of material for ironing
•
Inductor for ironing material may be removed if you wish to iron materials
with circular shape, e.g. skirts.
•
The screw on the left lateral side of the roller holds the bracket of the
material induceris to be loosened and bracket of the inducer is to be detached
(bottom figure).
•
Lift the inducer of material upward from the holder on the right side of the
roller and then pull it toward the left side of the roller.
•
After removing the material inducer return the screw back into place.