11
Assemble the Right Rear Wheel
1.
Locate the snap pins (14.3) and large washers (14.5) from the blister box.
2. Slide the rear wheel onto the axle with the gear teeth facing in. Ensure the gear
teeth fully engage with the pre-installed gearbox.
3. Slide the rear large washer (14.5) onto the axle, and then insert the straight end of the
snap pin through the hole on the rear axle.
4. Snap the wheel rim (9) onto the rear wheel.
Helpful Tip:
1.
wheels onto the rear axle, then your rear
wheel axle may need to be realigned.
2. Remove both wheels from the rear wheel
axle. Using two hands, push down on
the rear wheel axle and slide it gently
toward the side of the vehicle that needs
more room.
To assemble the right rear wheel:
14.3 14.5
9