10
Assemble the Rear Wheels
Gear teeth should
face inward
1. Remove the snap pin from the rear axle.
2. Slide the rear wheel on the axle with the gear teeth facing in.
3. For the left rear wheel, align the gear teeth on the wheel with the
gear box on the axle.
4. Slide a washer on the axle.
5. Slide the snap pin through the holes on the axle.
6. Snap the wheel cover onto the wheel, make sure all four tabs and
slots align.
7. Repeat for the other wheel.
Summary of Contents for Powersport W442AC
Page 24: ......