background image

20

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation.

This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the 
following measures: 

•  Reorient or relocate the receiving antenna.
•  Increase the distance between the equipment and the receiver. 
•  Consult dealer or an experienced radio/TV technician for help.
•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

•  Check the state or local requirements for the product before using the 

product.

responsible for compliance could void the user’s authority to operate the 
equipment. 

Summary of Contents for Powersport W442AC

























Reviews: