12
13
13
Dashboard/Windshield Assembly
1. Position the two front tabs
on the dashboard above the
slots on the windshield.
2. Snap the windshield onto
the dashboard.
3. Connect the wire from the
dashboard to the wire from
the car body.
1. Holding the dashboard/
windshield assembly
together, insert the steering
rod on the car body through
the hole of the dashboard.
2. Align the dashboard with
the slots on the car, and
slide the dashboard into
place
3. Use a Phillips-head
screwdriver to fasten the
dashboard screw (13)
into the two screw hole
locations on either side of
the dashboard.
Steering Rod
Summary of Contents for W458AC
Page 4: ...This page is intentionally left blank...
Page 26: ......