12
Right Rear Wheel:
1. Slide the right rear wheel (17) onto right rear wheel axle. The
side with gear teeth faces inward. (Note: the gear teeth must
engage with the gear box.)
2. Slide the rear flat washer (19) onto the right rear axle.
3. Slide the snap pin (20) into the hole on the right rear axle until
firmly attached.
4. Snap the rim (21) onto the right wheel.
5. Snap the hub cap (22) onto the completed wheel assembly.
Assemble the Right Rear Wheel
Helpful Tip:
1. If you encounter trouble fitting both wheels onto the rear axle,
then your rear wheel axle may need to be realigned.
2. Remove both wheels from the rear wheel axle. Using two
hands, push down on the rear wheel axle and slide it gently
toward the side of the vehicle that needs more room.
3. Once the rear axle is properly centered, refer to the above
steps to assemble the wheels.
17
19
20
21
22
Summary of Contents for W488AC
Page 4: ...This page is intentionally left blank ...
Page 22: ...22 This page is intentionally left blank ...
Page 26: ...26 This page is intentionally left blank ...
Page 28: ......