background image

 

Manual No. 4801-6404 Rev08-12-2013 

PolarCool 

Page 4 of 17 

2.  Limited Warranty 

All products are warranted to be free from defects in material and workmanship for a period of one year 
from the date of purchase if installed and used in strict accordance with the installation instructions.  
Liability is limited to the sale price of any products proved to be defective or, at manufacturer’s option, to 
the replacement of such products upon their return.  No products are to be returned to the manufacturer, 
until there is an inspection and/or a return-goods authorization (RGA) number is issued.  

All complaints should be directed first to the authorized distributor who sold the product.  If satisfaction is 
not obtained or the name of the distributor is not known, write the manufacturer that appears below, 
directed to the attention of Customer Service Manager. 

This limited warranty is expressly in lieu of any and all representations and warranties expressed or 
implied, including any implied warranty of merchantability or fitness for a particular purpose.  The remedy 
set forth in this limited warranty shall be the exclusive remedy available to any person.  No person has 

authority to bind the manufacturer to any representation or warranty other than this limited warranty.  The 
manufacturer shall not be liable for any consequential damages resulting from the use of our products or 
caused by any defect, failure or malfunction of our products (Some areas do not allow the exclusion or 
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to 
you.) 

This warranty gives you specific legal rights and you may also have other rights that vary from area to area. 

 

 

Warrantor: 

RollSeal, Inc.

 

PO Box 140

 

Bremen, Alabama 35033 

Phone 256-287-7000 

Fax: 256-287-7010 

Summary of Contents for PolarCool 36" VS


















Reviews: