Part No 4801-5162 Rev 09-2019
RS-500/600 M Series Doors
Page 39
22
Cleaning Panels and Windows
Panels and Windows can be cleaned using a solution of cold to warm, mild soapy water and a cloth.
Wipe off the soiled area to remove dirt particles. Using a cloth gently wipe the panel and window with the soapy
solution. Thoroughly rinse the area with pure cold or warm water to remove soap.
Dry off thoroughly with a dry cloth.
DO NOT ROLL-UP the panel onto itself without making sure it
is completely dry!!!
DO NOT USE:
Solvents or strong alkaline cleaners. Use of these products could
cause damage.
If in doubt about a particular cleaning solution, please do not hesitate to contact customer service for our
recommendation.
23
Optional Door Features
23.1
Egress Strap (Optional Feature)
The Emergency Egress feature provides a simple and convenient way to open door in emergency situation from inside
the cooler should the door motor become inoperative due to a power failure or other conditions. The Emergency Egress
Strap is located at center top of door. The door is opened by using the Emergency Egress Tool to hook D-Ring and pull
strap down. Strap may be pulled by hand also. As strap is pulled, the door will open up enough that person can exit
cooler safely.
23.2
Soft Tension Pipes (Optional Feature)
Soft Tension Pipes are designed to reduce or eliminate injury from impact of tension pipe. Available as an optional
feature, existing doors can be upgraded. The pipe design helps to insure proper sealing of the door. Soft Tension Pipes
are available for door sizes up to 11 feet.
23.3
Impact Resistant Tension Pipes (Optional Feature)
The Impact Resistant Tension Pipe is more flexible than our standard Tension Pipe.
