Operating and Maintenance Manual
11 |
P a g e
D e c a p p e r O & M M a n u a l R e v D
YOU MUST USE SUPPLIED LOW STRENGTH LOCKTITE ON THE PINS.
WITHOUT LOCKTITE THEY WILL UNSCREW AND BREAK OFF IN THE GUIDE
ROD OR DAMAGE THE MACHINE.
❖
Before you install the FW Arms Decapping Die, we recommend
you get familiar with the decapper operation with the
adjustment of the drop tube and how the cases move and
The linkage must be placed in the
position as shown BEFORE you
attempt to screw the FW Arms
Decapping Die down.
Use the reverse switch and speed
controller to bump the linkage into
the lowest position.
Unplug the power supply before
working on the Decapper.
Screw the Decapping Die
down to touch the pegs and
then back out by ½ to 1 full
turn.
Use a spanner to hold the Decapper
body whilst tightening the locking nut
to prevent the body from turning.
The link and
the crank
assembly are
in alignment
as shown
Inject grease
into these 4
places regularly