MODEL 2410 ASSEMBLY, OPENING & FOLDING
Remove all packaging and take care not to discard the handknobs and
bolts for the push handles. It is easier to fit the handles after the rollator has
been opened.
Open
the
rollator
by
holding the seat pad and
gently pulling the rear
frame backwards. The rear
frame should locate behind
the locking lever as shown
in the image.
Insert the push handles into
the frame and fit the coach
bolt, washer and handknob
as shown in the image.
Tighten the handknob to fix
the push handle at the
desired height. Repeat this
process for the other side
ensuring the handles are at
the same height.
To close the rollator press
the lever ‘1’ as shown
opposite and gently lift the
top of the rear frame. The
rollator should now easily
fold together. Take care not
to pinch fingers in the
folding mechanism.
Summary of Contents for 2320
Page 15: ...Notes ...
