4
GRID
portable power pack
44ah
Instructions for use
Power appliances:
1. Simply connect the appliance’s power plug into the
corresponding socket: A, B, C or D.
2. Press the on/off switch. The LED indicator should
illuminate to show the power is supplied to the
socket.
3. Press the USB switch ON when charging 5V DC
appliances via the USB port. The USB (GREEN)
indicator light will illuminate.
4. Insert Anderson style plug from the appliance
directly into the Anderson style plug socket on
the side of the Power Pack. The digital display
will show the VOLTAGE (V) of the Power Pack. The
CURRENT (A) amperage display will be zero (00.0).
Overload protection:
12V DC output:
When an overload of 15 Amp power draw is detected
on a single DC output socket, the circuit breaker will
automatically turn off the power to the socket to
protect the Power Pack. Switch OFF the DC output
socket and disconnect the appliance from the Power
Pack. Press the circuit breaker reset button to
resume the power supply. Reconnect the appliance
and switch ON the DC output socket.
When an overload of 16 Amp combined power draw
is detected from both DC output sockets, both circuit
breakers will automatically turn off the power to
the sockets to protect the Power Pack. Switch OFF
one of the DC output sockets and disconnect that
appliance. Press both circuit breaker reset buttons
to resume the power supply and reconnect one of
the appliances only. Switch ON the DC output socket.
5V DC USB port:
If a power overload is detected while charging
a 5V DC appliance, the USB power supply will
automatically reset within 2 minutes after the
appliance has been disconnected from the
USB port.
12V DC
Cigarette
lighter
socket
12V DC
Merit
style plug
socket
5V DC
USB
port
12V DC
Anderson
style plug
socket
A
B
C
D
