- 6 -
Avoid Risk of Electric Shock and Fire
1. Keep the power cord away from heat, dampness and sharp edges. Contact
support@
zimplistic.com
for replacement or repair of damaged cord or plug.
2. Plug your Rotimatic into suitable and grounded electrical sockets only.
3. Ensure that the voltage of the power source corresponds to the voltage indicated on the
rating plate on the back of your Rotimatic.
4. Do not operate another high wattage appliance on the same circuit along with your
Rotimatic.
5. Always attach the Rotimatic power cord to the Rotimatic first, then connect the electrical
plug into the power outlet. To disconnect, power off your Rotimatic, then remove the plug
from the power outlet.
6. In case of emergency, immediately switch off the power and disconnect the Rotimatic.
7. Never place your Rotimatic on or beside hot surfaces such as radiators, stoves, ovens, gas
burners, open flame or similar conditions to avoid hazardous damage.
Safe Operation of Rotimatic
1. Do not close the front door while the Rotimatic is in use to avoid over-heating.
2. Ensure that there are no liquid spills on any surface, especially on the top, inside the flour
container, inside the flour slot, inside the flour dispensing tunnel and inside the machine.
3.
Do not open the side door during the roti-making process to avoid danger of injury
from moving parts inside. Open only when prompted by the Rotimatic or for cleaning after
rotimaking is complete.
4.
Do not remove the flour container or its lid during the roti-making process to avoid
danger of injury from moving parts inside. Open only for refilling flour when prompted by
the Rotimatic or after roti-making is complete.
5. Do not operate the Rotimatic after malfunction or has been damaged in any manner.
Contact
support@zimplistic.com
for examination, adjustment, repair or replacement.
6. Regularly clean the Rotimatic in accordance with instructions to avoid risk of fire or food
contamination.
7. Power off your Rotimatic when not in use and before cleaning. Allow the heating pans to
cool for 25 minutes before cleaning, removing or reattaching parts.
Summary of Contents for ZMA0111
