Ver.2 091021
• ReTurn is not intended for long transfers.
•Return can only be used on flat floor.
• The caregiver must always apply counter pressure when the patient is standing up,
sitting down (1) and during the actual transfer (2).
To transfer with ReTurn, the patient must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
NOTE! Increased tipping risk.
If ReTurn7400 is used for patients of normal height, it is essential that the patient
can support his/her weight while standing and can maintain balance for a prolonged
period.
A. Push the raising ladder/tube down into the mounting fixtures on the chassis, so
that the height-adjustment buttons are facing towards the caregiver.
B. Insert the fixture knobs and tighten. Check to ensure that the fixture knobs are
securely tightened before using the ReTurn.
Assembly
Transport
The chassis and raising ladder can be carried separately. Carry the chassis by hold-
ing the tube on the front end of the product.
Transport, e.g., by car, and storage are easy, since the ReTurn can be disassembled
in two pieces.
Special requirements and conditions
M A N U A L
2
1
2
A
B
