background image

Ver.2 091021

Position the ReTurn close enough to enable good placement in the wheelchair. The 
caregiver applies counter pressure before the patient sits down.

Two caregivers with ReTurnBelt

The RoMedic ReTurnBelt allows different gripping alternatives, and helps and encour-
ages the patient to lean forward.
One caregiver helps the patient to lean forward and provides support during raising. 
See manual for ReTurnBelt.

To toilet/shower chair
 

For transfers to the toilet, space is allowed for the caregiver to assist the patient with 

the pants. The back also has a small recess that allows the patient to get close to the 
toilet and achieve a good seated position. 

Farther back in the chair

If the patient slides forward in the wheelchair, the ReTurn can be used to help the patient to 
slide farther back in the chair.

Remove/raise the wheelchair foot plates, and then run the ReTurn in towards the wheel-
chair. The patient places his/her feet on the foot plate, grasps the raising ladder, leans for-
ward, and then lifts from the seat. The caregiver provides counter pressure. Slide the patient 
farther back in the chair when he/she has lifted slightly from the seat.

M A N U A L

5

Summary of Contents for ReTurn 7500







Reviews: