background image

When in doubt, contact your RoMedic representative for product trials, advice or information.
If you require additional information, contact your transfer specialist or our representative, or visit www.romedic.com. Make 
sure you always have the most recent version of the manual. Manuals are available for downloading from our website; 
http://www.romedic.com

Care of the product

• Use a soft cloth and mild cleaning agent such as dishwashing liquid or car shampoo to clean the ReTurn. Do not use 

abrasive cloths or brushes to clean the base plate.

• Do not use solvents.
• To disinfect, use 70% alcohol.

Technical specifications 

Art.nr 7500 Complete ReTurn (5 pcs)
 
7501 Ladder to 7500

Art.nr 7400 Complete ReTurn (5 pcs)

7401 Ladder to 7400

SWL, Max weight: 

 150 kg/330 lbs (static load)

Total weight: 

16,5 kg/36 lbs

Patented by SE Patent No. 522 028

RoMedic AB 
Box 640                                    Tel: +46 (0)8-594 773 33             Internet: www.romedic.com 
SE-175 27 Järfälla               Fax:+46 (0)8-594 773 44            E-mail: office@romedic.com
SWEDEN

ReTurn7500/ReTurn7400

ReTurn7500

ReTurn7400

Summary of Contents for ReTurn 7500







Reviews: