21
22
n
Auto Answer
With this feature, you can answer a call by
just picking up the handset from the base
without pressing any key.
1. Press the
key.
3. Use the
key to choose
,
then press the
key.
4. Use
key to choose
/
to enable/
disable the function, then press the
key,
you will hear a confirm beep.
AUTO ANSWER
ON OFF
2. Press the
key repeatedly to choose
, press the
key.
HS
SETTING
MENU/R
MENU/R
MENU/R
MENU/R
n
HS Name
"HS N" is the default name of the handset after
registration of handset. The handset number N=
1 to 5 reflects the handset is the Nth handset,
which is registered to the base. The HS Label is
displayed in the Standby mode. You can modify it
by the following steps:
1. Press the
key.
2. Press the
key repeatedly to choose
, press the
key.
HS
SETTING
3. Use
key to choose
, then press
the
key.
4. You can enter the handset name (up to 6
characters) by using the alphanumeric keys
(use the
key to delete the previous
character if necessary), then press
key to
confirm and exit. The handset name will be
modified.
HS LABEL
MENU/R
MENU/R
MENU/R
MENU/R
n
Paging
n
Dial Mode
To stop paging, press the
key on the base again
or any key on the handset.
You can page the handset from the base unit
making it ring with a special tone. It's useful to
locate a lost handset.
Press the
key on the bottom of the base (less
than 5 seconds), all the handsets registered to
the base will ring for about 60 seconds.
You can select to change the dial mode by the
following steps:
1. Press the
key.
2. Press the
key repeatedly to choose
, and press the
key.
3. Use the
key to choose
, then
press the
key.
BS
SETTING
DIAL MODE
4. You can press the
key to select the required
dial mode options (
/
) and press the
key. A confirm beep will be heard.
TONE PULSE
Note
:
If you are not sure which dialing mode to
select,
please
contact
your
local
service
provider.
Note
:
On a long
key press, more than or equal to
5 seconds, the base will enter subscription
mode. For details, see page 35.
MENU/R
MENU/R
MENU/R
MENU/R
