15
Introduction
We are pleased you decided in favour of this comfortable electrical stand grill and would
like to thank you for your confi dence. Its easy and safe operation will certainly fi ll you with
enthusiasm as well. To make sure you can enjoy using this appliance for a long time, please
read through the following notes carefully and observe them. Keep this instruction manual safely. Hand
out all documents to third persons when passing on the appliance. Thank you very much.
Intended use
The electrical stand grill is designed for grilling food with short or long cooking time (domestic use only).
Other uses or modifi cations of the appliance are not intended and harbour considerable risks. For damage
arising from not intended use, the manufacturer does not assume liability. The appliance is not designed
for commercial use.
Technical data
Only connect the appliance to an isolated ground receptacle installed according to regulations. The rated
voltage must comply with the details on the rating label. Only connect to alternating current.
The appliance must be fused via a ground fault circuit interrupter (GFCI) whose tripping current should not
be higher than 30 mA.
Nominal voltage:
230 V~ 50 Hz
Nominal power:
2200 W
Scope of supply
Check the scope of supply for completeness as well as the soundness of the product and all components
(see product description page 2) immediately after unpacking.
Verpackungsmaterial
Do not simply throw the packing material away but recycle it.
Deliver paper, cardboard and corrugated cardboard packing to collecting facilities. Also plastic packing
material and foils should be put into the intended collecting basins.
In the examples for the plastic marking PE stands for polyethylene, the code fi gure
02 for PE-HD, 04 for PE-LD, PP for polypropylene, PS for polystyrene.
Instruction manual
GB