31
2. Removal of connection hose
• The connection hose is placed in the lid of the
appliance, above the foil roll compartment.
• Remove the connection hose, then close and lock
the lid of the appliance.
Note:
This may cause a squeaking noise due to the
pressure equalisation.
3. Plugging of connection hose
• Plug the first jack of the connecting hose in the port
of the appliance. Insert firmly until it stops.
• Firmly insert the second jack to the socket on the lid
of the vacuum container.
Note:
Pay attention to the proper fit of the
vacuuming hose at both ports!
4. Vacuuming the container
• To start the programme, press the button
Behälter
.
Note:
The process can be stopped any time by pressing the button
Automatik/Stopp
.
Note:
The appliance stops automatically after one minute extraction
time, if the container or the hose are not tight.
• The appliance activates the pump and extracts the air from the container. A vacuum
develops. The pilot lamp above the button
Behälter
lights during the operation, the pilot
lamp above the button
Lebensmittel
turns off.
• The pump stops after successful extraction of air.
• As soon as this pilot lamp above the button
Behälter
stops lighting, the process is
completed. The appliance switches to operation mode. Just one of the pilot lamps above the
button
Lebensmittel
is lighting.
• Disconnect the vacuuming hose from the container and the appliance
• After use, pull the power plug and bring the lid into storage position.
