4.
Insert leads from the external speakers into SPEAKER # 2 OUT on the 2-way switch.
5.
Insert leads from music system into SPEAKER INPUT on the 2-way switch.
6.
Plug in your music system.
7.
Select the required operation (CD/radio etc) and adjust volume to required level.
8.
SWITCH 1 on the 2-way switch operates the integral speakers in the cushion. SWITCH
2 on the 2-way switch operates the external speakers. Any variation may be selected.
Please Note: A high bass setting produces more vibration
PLEASE NOTE
Music Systems supplied approximately 2008 onwards may have different speaker
connections compared with those of earlier models of music systems. Please refer to the
diagrams below in case you have a newer model of music system. Older models of music
systems tended to have small sockets with a round hole in that were covered by a small
pushable cover (often red and black):
Please refer to the revised image below to show the connection of ROMPA
®
products to newer
models of music systems:
