If required, i.e. depending on your music system, it may be necessary to follow the steps outlined below:
1.
Cut the speaker cables approximately 30cm from the plugs
2.
Strip the ends of the wires attached to the plugs and connect to ‘IN’ of the ROMPA
®
2-way speaker control (splitter box).
3.
Strip the ends of the wires attached to the speakers and connect to ‘OUT’ of the ROMPA
®
2-way speaker control (splitter box), Channel 1.
4.
Connect the ROMPA
®
product (i.e. Musical Positioning Cushion) to ‘OUT’ of the ROMPA
®
2-way speaker control (splitter box), Channel 2.
5.
Use the switch on the ROMPA
®
2-way speaker control (splitter box) to direct the sound to either: Speakers, ROMPA
®
product (i.e. Musical
Positioning Cushion), or both.
