8.
Compatible ROMPA® Products
ROMPA® offers an extensive range of wall and floor cushioning products. Visit
9.
Starting Up
1.
Attach appropriate fixings to the back of the mirror e.g. mirror plates.
2.
Use the fixings to create a template so you know where to drill your wall.
3.
Drill the wall where you have marked and insert wall plugs, screws etc.
4.
Make sure the product is properly attached to the wall before use.
5.
Remove the protective film from the front of the mirror.
10.
Detailed Description
A safety mirror with a soft surround. Extensive range of colours available – from white or
cream for your Snoezelen® environment or bold colours to compliment your Soft Play area.
Adds even further visual interest to these highly popular decorative features.
11.
Safety
Always supervise the use of this product.
Periodically check that the mirror is still securely attached to your wall.
12.
Technical Specification
Size:
approximately 115 x 115 x 10cm
Weight:
approximately 12kg
13.
Installation
1.
Attach appropriate fixings to the back of the mirror bearing in mind the following:
-
Fixings are not included. Purchase fixings that are appropriate to the construction
of your wall and that can comfortably hold the weight of the mirror.
-
Mirror plates may be appropriate
-
There are no pre-drilled holes in the back of the mirror
2.
Use the fixings to create a template so you know where to drill your wall.
3.
Make sure there are no pipes or cables behind the intended location of the mirror.
4.
Drill the wall where you have marked and insert wall plugs, screws etc (subject to what
is most appropriate).
5.
Make sure the product is properly attached to the wall before use.
6.
Remove the protective film from the front of the mirror.
