14.
Care and Maintenance
Please observe the following for all materials:
Always supervise the use of products.
Organise a regular cleaning schedule.
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by
hard objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects
coming into contact with the padded surround.
Check seams of the surround regularly to ensure that these are not worn or split and
the interior filling cannot be accessed.
Wipe off accidental marks/liquids at the time they occur or are noticed.
Avoid eating and drinking whilst using these products.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect the materials over time.
Do not saturate the material with lots of water.
PVC (Vinyl)
Use a soft brush remove all loose dust/dirt.
Clean with a mild detergent (such as Lux soap flakes in luke-warm solution) applied to a
sponge or damp cloth.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use an abrasive cleaning pad.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or solvent
based cleaner as this will cause the coating to discolour and go hard.
Steam cleaning is not advised.
15.
Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
MIRROR WITH CUSHIONED FRAME 20795, April 2017
Copyright ROMPA® Ltd
