9.
Once assembled, the Itinerant Frame is ready to use. The image below shows the Flying
Saucer Swing 21551 – the swing is to be purchased separately.
10.
The Itinerant Frame can be carried using the Velcro® straps. Using one of the black
straps included in the kit, place the loop end of the shorter strap through the eye bolt
and then loop the other end through and pull tight to lock the strap. The strap should
be in the centre of all four poles. Run all of the coloured Velcro straps through the
buckle of the first strap so that the blue colour is the last to go through the buckle. Drop
the coloured Velcro® piece aside and hold onto the looped end piece. With the existing
loop of Velcro® strap in your right hand, create a bunny ear loop in your left hand.
Insert the bunny ear loop through the existing loop and pull to create a larger loop.
Slide the bigger loop over the bottom of the legs. Hook the Safety Snap onto the loop
around the legs and then attach the other end of the Safety Snap to opening of one of
the end legs. Take the loose end of the strap with all the Velcro® colours on it and put
that through the Safety Snap and pull tight, connecting the black Velcro® to the blue
Velcro®.
