3.
The Height Adjustment Systems are supplied fully assembled and ready to suspend.
An additional Safety Snap is not included but will be required to secure each Height
Adjustment System used to the final point of suspension.
4.
We recommend that you adjust the Vertical Ascension Device before
hanging your equipment from it. Make sure that nothing is hanging
on or obstructing the rope or Vertical Ascension Device while
adjusting the height.
5.
Let the rope hang straight under the Vertical Ascension Device once the system is
secured to the final point of suspension.
6.
Gently push the round loop of the Vertical Ascension Device upwards, allowing the
rope to move freely through the device to the desired height. Once the desired
height has been achieved, release the round loop allowing the ‘teeth’ of the Vertical
Ascension Device to grip the rope, stopping any further movement of the Vertical
Ascension Device.
Summary of Contents for 21579
Page 12: ......
