background image

 

 

                  

 

 

 

5.

 

Adjust the dials on the left hand side of the front of the Amplifier according to need: 
 

VOLUME 
BASS 
TREBLE 
MIC (Microphone – only use once your Microphone is connected to the MIC socket) 

 
14.

 

Care and Maintenance 

 

 

Do not allow clients to pull on the cable. 

 

Do not immerse the unit in water. 

 

Make sure there is adequate air flow around the Amplifier – do not block the 
ventilation grilles at the sides of the Amplifier:

 

 

 

 

 

 

 

 

 
15.

 

Troubleshooting 

 

Problem: the Amplifier does not work: 

 

 

Check the Amplifier is plugged in and switched on. 

 

Check the music source dial setting matches your music source. 

 

If the power indicator light does not light up, check the 10 Amp fuse in the UK plug

.

 

  

 

Further copies of these instructions can be downloaded at www.rompa.com 

We hope you find our instructions invaluable.  If you have any suggestions for improving 
them further your comments will be greatly received – please contact us at 

producthelp@rompa.com

 

 

 

Amplifier 22956, February 2018 

Copyright ROMPA® Ltd 

Summary of Contents for 22956

Page 1: ...reater resonance and thus deeper tactile sensations through your vibro acoustic product Connects to a mobile device or music system and to your ROMPA vibro acoustic product both to be purchased separately 5 Contents Amplifier IEC lead kettle lead with a plug appropriate to the country of our customer 6 Snoezelen Stimulations Sound ...

Page 2: ...ustic product Connects to a mobile device or music system and to your ROMPA vibro acoustic product both to be purchased separately Bluetooth compatible Volume bass and treble adjustable With a microphone socket to allow singing along to music When ordering a vibro acoustic product from ROMPA e g Musical Squorner Musical Positioning Cushion etc please specify if this is for use with this Amplifier ...

Page 3: ...e that you adjust the large dial on the right hand side of the front of the Amplifier to AUX 1 Adjust the large dial on the right hand side of the front of the Amplifier to Bluetooth if using a Bluetooth device 3 Connect the amplifier to your vibro acoustic device Use the 6 3mm SPEAKER OUTPUT sockets LEFT and RIGHT for connecting the cables from products such as ROMPA Musical Water Beds When conne...

Page 4: ... the sides of the Amplifier 15 Troubleshooting Problem the Amplifier does not work Check the Amplifier is plugged in and switched on Check the music source dial setting matches your music source If the power indicator light does not light up check the 10 Amp fuse in the UK plug Further copies of these instructions can be downloaded at www rompa com We hope you find our instructions invaluable If y...

Reviews: