14.
Care and Maintenance
Keep away from sharp and pointed objects.
Bertie Bolster is not intended to be jumped on.
Regularly check Bertie Bolster for wear and tear. Discontinue use if damaged until repaired
or replaced.
Observe the following:-
1.
Organise a regular cleaning schedule.
2.
Fabric can be machine-washed at 30˚C
4.
Tumble dry on low.
5.
Make sure the item is thoroughly dry before use.
FABRIC MAINTENANCE
If you look after your Bertie Bolster it should give you many years of service, but please observe the
following:-
1.
Fabric may wear, tear or “rub off” if subjected to sharp objects or continual rubbing by hard
objects. Avoid shoes, buckles or sharp/hard objects.
2.
Wipe off accidental marks/liquids using a mild detergent and a damp cloth, avoiding excessive
amounts of water. Do not use cleaners with abrasives in them or solvent-based cleaners such
as trichloroethane or carbon tetrachloride. Liquid detergents used to wash cups/plates etc. are
ideal.
3.
From time to time lift the seating area to clean all surfaces and the floor underneath
15
Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving them
further your comments will be greatly received – please contact us at
BERTIE BOLSTER 17133, June 2015
Copyright ROMPA® Ltd
