OPERATION
1. The colours and pattern of the projection change by themselves – the colour and pattern
cannot be controlled.
2. Switch off again after use – press the ON/OFF button a second time to switch OFF.
3. Unplug after use.
14.
Care and Maintenance
Keep dry
Do not immerse in water.
Wipe clean with a very slightly damp clean cloth – if using an adapter, make sure this
is disconnected before cleaning
15.
Troubleshooting
Not applicable.
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received – please contact us at
producthelp@rompa.com
LASER SPHERE PROJECTOR 20378, October 2015
Copyright ROMPA® Ltd
