Mode
d’emploi
Mixers « ROMIX »
194010
–
194014 - 194019
Manual user
Temperature-dependent overload protection
To protect the motor from overheating at extreme
pemernanent load, it is switched off by the protective
electronic system when a crictical temperature is
reached.
After cooling-down period of approx. 3-5 min, the
machine is again ready for use and can be fully loaded.
When the machine is warmed by use, the temperature-
dependent overload protection reacts earlier as a
result.
Storage
The unit should be stored in a dry place where it is
protected agaisnt freezing.
Environmental protection
Do not open worn ou machine and return to the
collection facilities provided for recycling.
Maintenance
Guarantee
We guarantee appliances in accordance with statutory/
coutnry-specific regulations (proof of purchase by invoice
or delivery note).
Damage attributable to normal wear and tear , over load
or improper handling will be excluded from the
guarantee.
In case of compliant please send the machine,
undismantled, to your dealer or the service centre for
elctric power tools.
Product Recycling :
Recyclable product, do not dispose of the product with
unsorted municipal waste and separate collection of this
electrical appliance.
•
The ventialtion slots on the motor casing should
be cleaned out from time to time.
•
When the carbon briches are worn ut, the machines
switch itself. The machine must then be sent to
customer service for maintenance.
•
After approx. 100 hours of operation, check the motor
brushes and replace if necessary. Clean the motor
housing.
•
After approx. 200 hours of operation, renew the
grease filling in the gearbox.
Δ
To verify that the protection insulation remains
intact, the machine must be subjected to a technical
safety test afterwards. For this reason, this work mus
tbe performed ewclusively by a professional electro-
work-shop.
13-15 rue Taillefer 91160 Champlan
