REPLACING THE BOTTLES
When a bottle is empty, the ON/OFF button
flashes red.
A message on your Romy app will tell you that
you need to replace the used up bottle.
Refer to the section on
Replacing the bottles
Error messages
When an error with the
device is detected, the
ON/OFF button flashes red.
You need to take action.
Refer to the message
displayed on your Romy
app.
The device is ready when
the 1st LED starts flashing
again.
Message
Action
The water reservoir hasn’t been detected and/or Fill
the water reservoir
Refer to the section on
Filling the water reservoir
.
The cleaning accessory has not been detected
Refer to the section on
Accessories
.
Add/Replace the BASE SERUM bottle
Refer to the section on
Loading the bottles
.
Add/Replace the WASHING SOLUTION bottle
Refer to the section on
Loading the bottles
.