case it will have to be changed in order to connect.
If this is not the first time you have connected to this router and the right Wi‑Fi settings have
already been saved, the three LEDs will flash white and after a few seconds, Figure will move
straight from step 1 to step 3.
Step 1
Connect Figure to a power socket.
The ON/OFF button is red to indicate that the
device is on.
The three LEDs flashing white indicates that
Figure is trying to connect to Wi‑Fi.
Step 2
Wait for the 3 LEDs to flash red alternatively
before connecting with the application.
[1]
Enter the information required to set up your account.
[2]
Go into the menu DAY TO DAY CARE > START IN DAY TO DAY MODE > I’VE GOT Figure > CONFIGURE WIFI.
Enter the information to configure the WiFi
[3]
(connection may take a few seconds).
Step 3
Once the
connection has
been
established, the
ON/OFF button
will flash white.
Press the
ON/OFF button.
Step 4
The LEDs will
flash whilst the
device
initialises.
Step 5
The ON/OFF
light flashes red
to indicate there
are no bottles.
Step 6
A message on
your Romy App
will show that
the bottles need
to be loaded.
Go to step
Loading the
bottles
.