1.
The LEDs start to flash red after a few seconds to indicate that the user can connect to Figure via the
application.
2.
You can select the volume of your treatment. (see Manual connection).
3.
If the information entered is incorrect, an error message will be displayed on the application.
LOADING THE BOTTLES
Figure works with 1 bottle of BASE SERUM and 1 bottle of WASHING SOLUTION.
[1]
It doesn’t matter what order they are loaded in, the device recognises the bottles once they have been loaded.
It is important to load new bottles and confirm each bottle to ensure that Figure and the Romy app work properly.
Step 1
Open the loading hatch.
[2]
Scenario 1: empty loading
space or bottle(s)
The confirm button flashes
red and the rotation button
is steady blue.
Scenario 2:
The confirm button is
steady blue and the
rotation button flashes
blue.
Step 2
Remove the cap from the
bottle.
Step 3
Load the bottle, tilting it.
Make sure that the Romy
Paris logo is facing you.
Step 4
Press the Confirm button.
Step 5
Press the Rotation button.
Step 6
Prepare and load the 2nd
bottle in the same way.
