Cal. 507 / 517
Cal. 509 / 519
-
Pos. III
Setting the time
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
Pos. I
Position of rest (watch running)
Pos. II Quick-change correction for date
The date display comprises a 2-disc system. For
construction reasons, on the first day of a new month,
the date must be set on 01 via the quick-change
method passing through 31–39.
The date can also be changed during the day-changing
phase between approx. 10 pm and midnight. The date of
the following day has to be set, because no automatic
date change takes place at midnight.
– Pull the crown out to position II (watch still running).
– Turn the crown clockwise until the required date appears.
– Push the crown back into position I.
Pos. III
Setting the time
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
0
9
/ 201
7
Applies to all calibers:
Battery type: 371 / SR920SW
(Ø 9.5 mm x 2.05 mm)
Precision: +20 / -10 seconds per month
I II III
