IL-MO-045 Rev. 0 05/2010
Double Drawer Unit – QM2
not insulated
Pag. 4 / 12
PROFESSIONAL INSTALLATION REQUIRED
Before Installation
Verify model number on the box label.
Verify the counter hole measure refering to the following table :
The maximum deviation permitted is : 0.04’’ (1 mm). Otherwise the SMC
frame get deformed and drawers don’t work properly. Use spacers to get
the right counter hole dimensions.
Check with a level that the wall is plumb.
Verify with a level the horizontal and vertical level of the counter hole and
correct if not accurate.
Counter Hole
Model
a
b
+0,04
+ 0,04
inch
16,96
0
24.44
0
+1
+1
QM21
mm
431
0
621
0