NEXUS CALL SYSTEM
by Rondish
P22
3.2 Alarm Screen
The alarm screen will pop up when any event requires a response. If you tap on this icon when
no alarms are present, the screen will be greyed out, and automatically return to the Home tab
after several seconds. Up to three alarms can be displayed on the screen at once, however
additional active alarms are indicated by the red arrow below and can be viewed by scrolling
down the screen.
Alarms are ordered top to bottom by priority, with older alarms listed first.
3.2.1 Display Details
Includes time of the event with priority level, location, and type of alarm. When all alarms have
been reset, Nexus will automatically revert to the Home Screen after several seconds.
Color band
– this indicates the alarm priority, with a time stamp shown on the left side
•
Emergency – RED band, 0.5s beep interval
•
Bathroom – AMBER band, 4s beep interval
•
Standard Call – YELLOW band, 10s beep interval
Location 1
– this is typically a room or ward number, though is fully customizable
Location 2
– this is typically a bed or bathroom number, though it can include a patient name or
left blank
Emergency alarms display in RED, and
will automatically be moved to the top of
the queue.
Bath alarms display in AMBER, and have
higher priority than a standard call.
Normal Calls display in YELLOW, and will
be prioritized according to the first call
received.
Double arrow facing downward indicates
additional calls are active
