8
grounded in accordance with all local codes and orinances.
Improper installation of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the green grounding wire to either flat blade
terminal. The wire with insulation having a green outer surface with or without yellow stripes is the grounding wire
and must be connected to the grounding pin. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if you are in doubt as to whether the product is properly grounded. Do
not modify the plug provided. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrican.
The sprayer cord includes
a grounding wire with an appropriate grounding contact.
Never use an outlet that is not grounded or an adapter.
Do not use the sprayer if the electrical cord has a damaged ground contact. Only use an extension cord with
an undamaged ground contact.
Smaller gauge or longer extension cords may reduce sprayer performance.
Spray gun:
ground through connection to a properly grounded fluid hose and pump.
Fluid supply container:
follow local code.
Solvent and Oil-based fluids:
follow local code. Use only conductive metal pails placed on a grounded surface
such as concrete. Do not place the pail on a nonconductive surface such as paper or cardboard, which interrupts
grounding continuity.
Grounding the metal pail:
Connect a ground wire to the pail by clamping one end to pail and other end to ground such as
The sprayer requires for type475:
100-120Vac, 50 Hz, 11A, 1 phase,
circuit with a grounding receptacle
The sprayer requires for type 470:
220-240Vac, 50Hz,11A, 1 phase, circuit
with a grounding receptacle.
