USER MANUAL
7
When servicing a tool, use only identical replacement parts. Follow
instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may
create a risk of electric shock or injury.
.
SPECIFIC SAFETY RULES
WARNING!
For your safety, do not plug in your Power tool until you have read and
understood this Owner’s Manual.
- WEAR EYE PROTECTION. Use face or dust mask along with safety
goggles. Use hearing protection, particularly during extended periods of
operation, wear safety shoes, wear hard hat
- “Wear ear protectors with impact chisels. Exposure to noise can cause
hearing loss”
- DO NOT wear gloves, jewellery, neckties or loose clothing.
- DO NOT drill, cut or sand material too small to be securely held.
- ALWAYS keep hands out of the path of the drill bit and saw blade.
Avoid awkward hand positions where a sudden slip could cause your
hand to move into the path of the drill bit or saw blade.
- SECURE WORKPIECE. Use clamps or a vice to hold the work when
practical. It is safer than using your hand and it frees both hands to
operate the tool.
- MAKE SURE there are no nails or foreign objects in the part of the
workpiece to be cut drilled or sanded.
.
SPECIFIC SAFETY RULES – CONT’D
- TO AVOID INJURY from accidental starting, always remove the Plug
from the electrical socket before installing or removing a chisel bit.
DRILL SAFETY
- When using electric hammer chisel only use bits that are configured
