ROTARY HAMMER
12
WARNING!
The electric hammer chisel continues for a few second after the
trigger has been release, be careful when putting it down.
Fitting a chisel bit into the Hex housing.
Put the bit into the hex housing and clamp the bit by turning
the stop lever half a turn anti clockwise. This will lock the bit in
place.
Do not use the chisel until you are satisfied the bit is secured.
WARNING!
This electric hammer chisel does not have reverse direction,
so always take care not to force the chisel in case the chisel bit
gets stuck. Always make sure you keep the chisel going in and
Trigger switch
3
1
1
3
2
