ROTARY HAMMER
18
The carbon brush can be removed by removing the cap cover
(9), cap rubber and brush cap in that order at the interior.
To replace carbon brush reverse order of removal.
.
INSTALLING BITS
Never hold the chuck body with one hand and use the chisel
power to the chisel body to loosen or tighten bits. You may se-
verely injure your hand.
brush carton
WARNING!
Have you read “POWER TOOL SAFETY”, “DRILL SAFETY” and
“SYMBOLS” on pages 4,5 & 6 of this manual? If not, please do it
now before you operate this drill. Your safety depends on it!
Every time you use the drill you should verify the following:
1) Hex bit is secure.
2) Oil level is full.
3) Select to the function you want to do before you engage in
the proposed operation .
4) All safety apparel. Safety Glasses Safety Shoes. Safety
Gloves. Ear Defenders and Safety Hat are being worn.
Failure to adhere to these safety rules can greatly increase the
chances of injury.
WARNING!
Be prepared for binding and bit breakthrough. When these situations
occur, the chisel bit has the tendency to grab the workpiece.
This action will kick the chisel opposite to the direction of chisel bit
rotation and could cause loss of control when breaking through
