USER MANUAL
15
if you scythe in both directions.
Cut only with the side of the blade that the debris is moving away from
you.
If kickback occurs, the blade may be dull, the material so thick and hard
that you should use other tool instead of this machine.
Do not force the blade to cut. Do not change the angle of cut after into
the wood. Avoid using any pressure or leverage which could cause the
blade to bind or crack.
FUEL & OIL MIXTURE
CAUTION
-Never fill the fuel tank to the very top.
-Never add fuel to the tank in a closed non-ventilated area.
-Do not add fuel to this unit close to an open fire or sparks.
-Be sure to wipe off spilled fuel before attempting to start engine.
-Do not attempt to refuel a hot engine.
Fuel used for this model is a mixture of unleaded gasoline and approved
engine lubricant. When mixing gasoline with two-cycle engine oil, use
only gasoline which contains NO ETHANOL or METHANOL(Types of
Alcohol) Use Branded 89 octane or higher.
Unleaded gasoline known to be of good quality. This will help to avoid
possible damage to engine fuel lines and other engine parts.
NOTE
MIXTURE RATIO IS 40:1
GASOLINE-40PART OIL-1 PART
Fuel mixture at the rate other than 40:1 may cause damage to the
engine, Ensure mixture ratio is correct.
.
FUEL
The engine uses two-stroke fuel, a mixture of gasoline and 2-stroke
lubricant 40:1