USER MANUAL
5
These guards must always be fixed when operating the machine. Check
these guards before each use. If any damage (crack, break, etc.) on the
guard, contact with your dealer for replacing it.
If use of non-conformant replacement guards, or remove or modify
these guards could result in serious injury to the operator or bystanders.
- Keep the handles free from oil and fuel.
- Always use proper handles and shoulder strap when cutting.
- Do not smoke while mixing fuel or filling tank.
- Do not mix fuel in an enclosed room or near open flames. Assure
adequate ventilation.
- Always mix and store the fuel in a properly marked container that is
approved by local codes and ordinances for such usage.
- Never remove the fuel tank cap while the engine is running.
- Never start or run the engine inside a closed room or building. Exhaust
gas contain dangerous carbon monoxide.
- Never attempt to make engine adjustments while the unit is running
and strapped to the operator. Always make engine adjustments with the
unit resting on a flat, clear surface.
- Do not use the unit if it is damaged or poorly adjusted. Never remove
the machine’s guard.
- Inspect the area to be cut and remove all debris that could become
entangled in the nylon cutting head. Also remove any objects that the
unit may throw during cutting.
- Keep children away. Onlookers should be kept at a safe distance from
the work area, at least 15 METER (50 FEET)
- Never leave the machine unattended.
- Do not use this unit for any job other than those for which it is intended
as described in this manual.
- Do not overreach. Keep proper footing and balance at all times. Do not
run the unit while standing on a ladder or on any other unstable footing
location. Appropriately use the harness provided when operating the
machine.
- Keep hands and feet clear of the nylon cutting head or blade while unit
