GASOLINE BRUSH CUTTER
6
is in use.
- Do not use this type of machine for sweeping away debris.
- Do not use the unit when you are tired, ill or under the influence of
medication, drugs or alcohol.
- Use nylon cutting head which is free of damage. If a stone or any other
obstacle is hit, stop the engine and check the nylon cutting head. A
broken or unbalanced nylon cutting head must never be used.
FOLLOW INSTRUCTION FOR CHANGING
ACCESSORIES
- Do not store in a closed area where fuel vapors can reach an open flame
from hot water heaters, furnaces, etc. Store in a locked, well-ventilated
area only.
- Ensure safe and proper performance of your product. These parts
are available from your dealer. The use of any other accessories or
attachments may cause a potential hazard or injury to the user, damage
to the machine.
- Clean the machine completely, especially, the fuel tank, its surroundings,
and the air cleaner.
- When refueling, be sure to stop the engine and confirm that it is cooled
down. Never refuel when the engine is running or hot. When gasoline
spills, be sure to wipe it up completely dispose of those materials before
starting the engine.
- Stay clear of other workers or bystanders by at least 15 meters/50 feet.
- Whenever approaching an operator of the machine, carefully call his
attention and confirm that the operator stop the engine. Be careful not
to startle or distract the operator which can cause an unsafe situation.
- Never touch the nylon cutting head or blade when ever the engine is
running. If it is necessary to replace the protector or cutting attachment,
be sure to stop the engine and confirm that the cutting device has
stopped running.
- The engine should be turned off when the machine is moved between
work areas.