background image

AIR COMPRESSOR 25 LITER

10

1) Facing the back of the air compressor, grasp the handle firmly with 

two hands.
2) Life the air compressor toward you until it balances on the wheels.
3) Push the unit along to the desired location.

Lower their air compressor unit it sits securely on a flat surface.
dehumidifier role: dehumidifier tank absorbs and gathers droplets of 

water mixed in the compressed air to longers the life of the component 
working by compressed air.

.

BREAK- IN PERIOD

Before first use, run the air compressor at zero tank pressure with the 

drain valves fully open for 30minutes.

.

TURNING THE AIR COMPRESSOR ON/OFF

 

1) With the air compressor plugged in, pull the power switch to the ON 
position to power the compressor on.
2) To turn the air compressor off, push the power switch to the OFF position.

NOTE 

When the compressor is in the ON position, the air compressor will 
automatically turn back on when the designated tank air pressure 
limit. It will also shut off again when the desired limit. It will also shut off 
again when the desired pressure is reached.

WARNING!

Never exceed the air tool’s pressure rating as recommended by 

Summary of Contents for RC-2512




















Reviews: