AIR COMPRESSOR
16
14
1) When finished, always drain the tank and unplug the unit.
Never leave the unit plugged in and/or running unattended.
2) Recommended for the use of a residual current device with a
rated residual current of 30mA or less.
DRAINING THE TANKS
To help prevent tank corrosion and keep moisture out of the air,
used, the air tanks of the compressor should be drained daily.
.
TO DRAIN
1) Turn the air compressor off.
2) Pull the ring on the pressure relief valve to release until pres-
sure gauge reads less than 1.4 bar.
3) Release the ring.
4) Rotate drain valves counterclockwise to open.
5) Tilt tank drain moisture tank into a suitable container.
NOTE:
Condensate is a polluting material and should be disposed of in
compliance with local regulations.
1) If drain valves are clogged, release all air pressure, remove
and clean valves, then reinstall.
DANGER!
Unplug the air compressor and release all air from the tanks be-
fore servicing. Failure to depressurize tanks before attempting
Summary of Contents for RC-5010
Page 1: ...AIR COMPRESSOR 50LITER RC 5010...
Page 2: ......