Ronson RFP600 Series, User Manual

12

7. 

When processing is complete, 

turn the control dial to the ‘OFF’ 

position, switch off at the power 

outlet and unplug from the 

outlet. Wait until the disc has fully 

stopped rotating before removing 

the lid.

8. 

Carefully remove the assembled 

disc holder.

9. 

Remove the foodstuffs from the 

Food Processor bowl. Unlock the 

bowl from the motor base to 

remove foodstuffs if required.

10. 

Clean the Food Processor bowl 

and stainless steel disc as per 

the Care, Cleaning and Storage 

instruction on page 20. 

NOTE:

If the ingredients stick to 

the sides of the Food Processor 

bowl during processing, turn 

the control dial to the ‘OFF’ 

position, switch off at the power 

outlet, ensure the blade has 

fully stopped rotating before 

removing the lid and then push 

the food back onto the blades 

using a plastic spatula to scrape 

down the sides of the bowl. 

Replace lid, turn power on at the 

power outlet and recommence 

processing.

NOTE:

Do not over fill the Food 

Processor bowl past the 1200ml 

(MAX) line for solids. Do not 

process thin fluids such as water, 

milk, stock, juice etc. in the Food 

Processor bowl as this could 

result in overflow. To reduce the 

risk of overflow, always add drier 

or thicker ingredients to the Food 

Processor bowl prior to adding 

fluids. For greater quantities of 

liquids, the Blender jug should  

be used.

NOTE:

The Blender Processor is 

designed so that the motor will 

not operate without the Food 

Processor bowl and lid correctly 

locked into position. In the 

event that the appliance starts 

without the lid correctly locked 

into position, immediately 

disconnect at the power outlet 

and return to your local Ronson 

Service Centre for examination.

Disassembling the Food 

Processor Lid

With one hand holding the motor 

base and the other on the feed 

chute, turn the Food Processor lid 

clockwise so that the ‘ ’ symbol 

found on the lid is directly above the 

‘

ALIGN

’ symbol found on the top of the 

Food Processor bowl. Pull the Food 

Processor lid away from the Food 

Processor bowl to remove.

Assembly and Operation of Your Ronson  

Blender Processor 

continued