Ronson RFP600 Series, User Manual

13

Disassembling the Food 

Processor Bowl

1. 

Remove Spindle 2 from the Food 

Processor bowl. 

2. 

With one hand holding the motor 

base and the other holding the 

handle of the Food Processor 

bowl, turn the bowl clockwise 

so that the ‘

LOCK

’ symbol on the 

Food Processor bowl handle is 

directly above the ‘

ALIGN HANDLE

’ symbol 

on the motor base. Pull the Food 

Processor bowl away from the 

motor base to remove.

3. 

Remove Spindle 1 from the  

motor base. The motor base 

is now ready to assemble the 

Blender jug.

Assembling the Blender

1. 

Place the motor base on a flat, 

dry surface such as a bench 

top. Make sure that the Blender 

Processor is switched off at the 

power outlet and the power cord 

is unplugged from the outlet.

2. 

Place the Blender jug onto the 

motor base. Align the ‘ ’ symbol 

found on the lower edge of the 

Blender jug with the ‘

ALIGN HANDLE

’ symbol 

found on the motor base. Turn the 

Blender jug anti-clockwise until the 

‘ ’ symbol found on the Blender 

jug meets the ‘

LOCK HANDLE

’ symbol on the 

motor base. Once aligned, the 

Blender jug will be locked onto 

the motor base and secure.

NOTE:

The Blender will not 

operate unless the Blender jug is 

correctly positioned and locked 

onto the motor base.

Operating the Blender

1. 

Ensure the control dial is in the 

‘OFF’ position. 

2. 

Insert the power plug into a 230V 

or 240V power outlet and switch 

the power on at the power outlet. 

3. 

Place the ingredients to be 

blended into the Blender jug. 

NOTE:

 Do not overfill the Blender 

jug above the 1500ml (MAX) 

mark. Replace lid, turn power 

on at the power outlet and 

recommence blending.

4. 

To fit the Blender lid, place the lid 

so that the spout cover is either 

to the left or right of the jug spout 

and the lid sits flat. Twist the lid 

until the spout cover and jug 

spout are aligned. Ensure that 

the ‘filler cap’ in the centre of the 

jug lid is also fitted correctly into 

position. The blender is now ready 

to use. 

5. 

With one hand placed on top of 

the blender lid, turn the control 

dial from the ‘OFF’ position to 

either the ‘LOW’ or ‘HIGH’ speed 

setting depending on what the 

recipe requires. The speed can 

be changed at any time during 

blending. For short bursts of power, 

use the ‘PULSE’ speed setting. 

6. 

If ingredients need to be added 

during blending, remove the  

‘filler cap’ and drop or pour 

through the hole.

7. 

When blending is complete, 

turn the control dial to the ‘OFF’ 

position, switch off at the power 

out and unplug from the power 

outlet. Wait until the blades have 

fully stopped rotating before 

removing the lid or jug.