Ronson RFP600 Series, User Manual

6

CAUTION:

 In order to 

avoid a hazard due to 

inadvertent resetting 

of the thermal cut-out, 

this appliance must not 

be supplied through 

an external switching 

device, such as a timer, or 

connected to a circuit that 

is regularly switched on 

and off by the utility.

Important  

Safeguards For All  

Electrical Appliances

•  Fully unwind the power cord before use. 
•  Connect only to a 230V or 240V  

power outlet.

•  Do not let the power cord hang over 

the edge of a bench or table, touch hot 

surfaces or become knotted.

•  To protect against electric shock, do not 

immerse the power cord, power plug or 

appliance in water or any other liquid or 

allow moisture to come in contact with 

the part, unless it is recommended in the 

cleaning instructions.

•  The appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use 

of the appliance by a person responsible 

for their safety.

•  Children should be supervised to  

ensure that they do not play with  

the appliance.

•  It is recommended to regularly inspect 

the appliance. To avoid a hazard, do not 

use the appliance if power cord, power 

plug or appliance becomes damaged 

in any way. Return the entire appliance 

to the nearest authorized Ronson Service 

Centre for examination and/or repair.

•  Any maintenance other than cleaning 

should be performed at an authorised 

Ronson Service Centre.

•  This appliance is for household use only. 

Do not use this appliance for anything 

other than its intended use. Do not use 

in moving vehicles or boats. Do not use 

outdoors. 

Misuse may cause injury.

•  The installation of a residual current 

device (safety switch) is recommended 

to provide additional safety protection 

when using electrical appliances. It 

is advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

•  Always turn the appliance to the ‘OFF’ 

position, switch off at the power outlet  

and unplug at the power outlet when  

the appliance is not in use.

•  Before cleaning, always turn the 

appliance to the ‘OFF’ position, switch 

off at the power outlet, unplug at the 

power outlet and remove the power 

cord, if detachable, from the appliance 

and allow all parts to cool.

•  Do not place this appliance on or near 

a heat source, such as hot plate, oven 

or heaters.

•  Position the appliance at a minimum 

distance of 20cm away from walls, 

curtains and other heat or steam sensitive 

materials and provide adequate space 

above and on all sides for air circulation. 

CAUTION:

 The processing 

blade and discs are 

extremely sharp, handle 

with care at all times.  

Do not place hands, 

knives, or other utensils 

into the food chute. 

Always use the food 

pusher to push the food 

down the food chute.