background image

SAFETY NOTICES

DO NOT DISCARD

Failure to observe these precautions  
could result in serious injury or death.

Read All Safety Notices and Product Manuals

Do not install or operate this winch before reading and fully understanding the  
contents of this Product Manual.

Stay Alert When Operating

Andersen winches are very powerful and have the potential to cause significant damage 

and/or serious injury if used improperly or without due caution and vigilance.

Operators Must be Trained

Help prevent significant damage and/or serious injury by ensuring any person operating a 

winch has a thorough understanding of its proper operation and is aware of the potential 
hazards involved. As a minimum, all winch operators must read and understand this Safety 
Notice Sheet and the Product Manual.

Particular attention is drawn to the following points:
•  Children and others not qualified to operate a winch must be kept at a safe distance 

from the winch and any rigging or fittings that are under load.

•  Long hair and/or loose clothing must be tied back to avoid being caught in the winch.

Avoid Accidental Operation

Remove winch handles when not in use to help avoid unsupervised or unintentional 

operation. Failure to do so could result in significant damage and/or serious injury.

Lifting Operations

Any lifting operations should be conducted by two persons in order to maintain  
constant visual contact with the object being lifted.

The rope must be secured properly by tying off, or leading to a suitable fitting 

 

such as a cleat or bollard.

p7

Classic 10 

(V.3.0)

Summary of Contents for ANDERSEN Classic 10









Reviews: