61
MAINTENANCE
PREVENTIVE MAINTENANCE
JACKING THE MACHINE
Always park the machine on a flat dry surface before jacking.
Ensure that the hopper is empty before jacking the machine.
The machine should be jacked up only using its designated jacking points,
failure to do will cause damage/injury to machine or operator.
Use a jack which will support the weight of the machine.
Use jack stands to support the weight of the machine if hoisted up for a longer
period of time.
The front jacking points are at the flat bottom portion of the machine which can
be accessed by opening the broom chamber door.
The rear jacking point is located at the middle of the rear bumper, to access it
remove the rear skirt portion as in fig. Below, place a suitable jack. Use a jack
stand if required.
Front
Rear
When servicing or changing tires,
block the tires before jacking.
STORING THE MACHINE
If the machine has to be stored for a prolonged duration follow the below
procedure:
1. Clean the machine completely to remove any dirt.
2. Clean the dust filters and hopper completely.
3. Park the machine in a dry covered place to protect it from the elements.
4. Ensure that the parking brake is engaged.
5. Drain off fuel.
6. Remove ignition key.
7. Place wheel blocks.
8. Cover the machine with an automotive grade cover and secure it.
Summary of Contents for RHINO RD 160
